Dyepot Redux

Still talking about dyeing fabric/garments, and this is the project that started it all for me. Last year I was browsing various style blogs and came across a photo of a linen duster. I can't remember which blog now, but the photo showed a white duster, in a sheer linen fabric, in a boxy style reminiscent of Eileen Fisher (which it might have actually been). I believe the blogger mentioned that it was from a sample sale, so the picture was the only guideline I had. It seemed like a potentially useful garment for my life -- a little extra coverage for summer sleeveless, but light and airy to not add (much) extra summer heat. And to add to its appeal -- I had a pattern that closely mimicked its style lines -- Kwik Sew 3732.

Finding a sheer, see-through 100% linen was the first challenge (more on that later) but once sourced it was an easy process to adapt the pattern -- which was mostly lengthening the bodice and the sleeves -- and sew it up.  Once finished and on the hanger it looked like the perfect summer accessory. And then I put it on.  I'd sewn the pattern before, so fit was not a problem, but there was something about it that just didn't work for me.  At first I thought it was too plain -- too minimalist -- too lab coat. Maybe if I introduced some decorative hemstitching to the seamlines? In the end though I simply hung it up in my closet, where it stayed until my recent clear out.

I'd been thinking a lot about what colors suited me now that my hair was no longer dark, and it finally came to me just what was wrong with my duster.  It wasn't too plain, it was just too white -- I now needed more contrast.  

So, dye to the rescue.  I wanted color, but still nothing too dark in order to keep things light and summery, so I went with aquamarine.

It was just enough to leave the lab coat vibes behind, and it was a color that looked good with the many navy garments already in the closet. Now, it can join the working garments instead of hanging uselessly in the closet.

I didn't have a lot of luck finding the fabric I wanted to use in my sources for apparel fabric, but on a lark I looked at the offerings in home dec fabrics -- bingo! -- sheer woven linen. Most likely meant for sheer curtains (which might also be a good source of fabric) but it worked up just fine for a duster.  Granted, not many of us would want to end up looking like Granny's sofa, but there are often lots of fabrics which can slide easily between apparel and home dec, so it is worth checking out what's available. One of my favorite jean jackets was made from a rustic cotton from the home dec line of Tommy Bahama -- now I'm wondering how that might look with a cooler toned color over dyed?

Changing It Up

Just trying for some normalcy in these crazy times...

Like a lot of other sew-ers I have a stash of fabric. Some of it is newer, some of it is gently aged. All of it was purchased because I liked it and saw a need for it in my wardrobe, and all of it was bought with the idea that it suited me in terms of color. And then -- I decided to stop covering the gray in my hair and let Mother Nature have her way. And suddenly all those warm, earthy colors that suited my dark rusty brown hair looked really bad with the silver that framed my face. Arghh! 

The nicer fabrics may find new homes, or perhaps be suitable for non-wardrobe uses, but I've been using some of the more ordinary fabric to make 'practice' garments in new patterns in order to work out fit issues.  Useful, but still -- I felt bad that I was not using them for their intended purpose.  What to do? Well, in my case -- get out the dyepot!

The first fabric shown was sold as a cotton shirting.  It is (in natural daylight) a pale golden yellow on white background with thin black stripes.

Better with an aquamarine over-dye, but still not exactly what I wanted.

Let's try something darker -- indigo (the color name, not the dye plant!)

That's what I want -- a deeper color without any warm overtones. In real life the blue is more evident -- this pic is much grayer than it is. By the way, the aquamarine overdye shown in the original pic was only done on a swatch -- not the full yardage. So, the indigo was not on top of the original color and an aquamarine overdye.  The top, which you're only seeing a small portion of -- is Courtney by StyleArc.

I also threw in some seersucker yardage. This was a medium brown stripe on a white background.

Now we're talkin'!  This fabric took up the dye exactly as I'd hoped.  The brown stripes are now a darker shade of indigo and the white stripes a lighter shade.

I did the dyeing in my top loader washing machine and used regular old Rit dye (liquid). Followed the instructions on their website, with one exception -- I did not put the dye solution down the dispenser. Instead I put that (and the salt solution) into the tub after filling it with water, then let it agitate for a couple of minutes to insure proper mixing before adding my fabric. There are specialty dyes out there for different types of fibers and I'm sure they do their job well.  In my case, I went with what was readily available and relatively inexpensive since it wasn't critical that I get a precise result. As always -- YMMV. 

Going small...

Sewing has slowed to a snail's pace, but craftiness continues with small projects. It's a great morale boost to actually plan, start and finish something. 

I like to keep small tools handy and close by my machines, but after knocking my thread snips off the counter (and point down into my bare foot) I knew I needed to keep them safely corralled. I could have searched out a small container from around the house - but sew-ers gotta sew - so I used some scraps to make a small basket.

It's simply some fabric, some PelTex double-sided ultra firm stabilizer and some Kam snaps. There are tutorials online for making folding baskets (usually labeled as bread baskets) but I've made a couple of substitutions to the usual supply list based on what I have on hand and my own preferences. For instance - the PelTex product was left over from a previous project, but it is also more rigid than the usual interfacing or batting.  Instead of ribbons or bias tape I like to use plastic snaps -- it's a more streamlined look, plus I have a nice assortment of them.

Here's the materials I used: PelTex double-sided ultra firm stabilizer - 5 pieces cut as follows - 2 pieces 7.25" x 2.5", 2 pieces 3.25" x 2.5" and one piece 7" x 3.25"

Fabric: quilting type cotton - 2 pieces 13" x 10"

Snaps: Kam plastic snaps - 4 complete sets (4 male/4 female plus corresponding caps)

And here's how it was laid out:  

My method was to fold over and press the outer edges of the fabric rectangles by 1/2" on all sides. Then I carefully laid out the Peltex pieces as per the above diagram - note that there is a space, or channel, between the pieces - they do not butt up against each other. They are placed on the wrong (non-public) side of the fabric as you are sandwiching them between the 2 fabric pieces. Next, carefully place the remaining fabric (right side up) over the PelTex layer being sure to have the bottom and top fabric layer lining up accurately. I lay everything out on my ironing board, as the next step is pressing the sandwich as per the PelTex instructions. This will bond the stabilizer to both sides of the fabric.

Finally we sew - edgestitch around the entire border to close everything up. Then stitch around the base (the larger piece of PelTex in the center of the sandwich) in the channel between the stabilizer pieces. You could also stitch around the other pieces, but I didn't on this project - the pieces are well bonded to the fabric, plus I don't think I'll need the extra security of stitching as I don't intend to wash this (famous last words!).

I eyeballed the placement of the snaps by folding up the corner edges of the box - they ended up approx. 5/8" in from the outer edge of the box and 2.5" from each corner point. Since you need to poke a small hole in the fabric to install each snap, I simply marked them by making a hole with my stiletto awl. And done - maybe not the usual method of making these boxes, but it worked for me.  Dimensions given are, of course, for the size basket I wanted to make, but it is a fairly easy math problem to change it up. I will say that the 2.5" height worked very well to make a basket deep enough to keep everything in place, but not so deep that you had to go digging for your tools.

And lastly - another small project - "Crooked Trail Cap", a slouchy cap from KnitSpot knit in Green Mountain Spinnery Ragg Time.